Group: Administrator
Level:
Posts: 4873
Joined: 1/28/2015
IP-Address: saved
|
<P>1, the use of large-scale renovation of the floor several times to remove the paint paint, surface, wood layer of about 0.5 mm, and then carefully sanding the floor surface delicate,хорошие деревянные пластиковые композитные напольные покупатели smooth to a new state. The corner of the floor is polished using a small angle grinder to achieve the overall smoothing effect.</P>
<P>2, the original side seam transparent putty removed, re-sealing, and then the whole floor of the floor sealed primer, to be dry. To be dry after the paint,хорошая фанера стеновой панели колонка австралия brush the first time finish, to be dry. Carefully sanded with water sandpaper, the surface layer grinding to slightly rough, remove the powder.</P>
<P>3, according to the above procedures brush three to four times the finish,установка антиоксидантного композиционного настила the last time without grinding. To be the last time after the dry finish on the floor wax can be.</P>
|
Search 
Calendar 
Gallery
Auctions 
Global 
Top
Members 
Stats
Chat (0) new 
send Password 
Register
