Group: Administrator Level:
Posts: 4873 Joined: 1/28/2015 IP-Address: saved

| <p>see whether the mouth is delicate, neat, after the installation of a solid connection, the plane and the end of the connection after the T-seam there is no gap, hand-driven there is no loosening. Door, drawer of the gap is too large, the general requirements for the provisions of 1mm ~ 2mm between the door and drawer opening and closing is </p> <p>flexible and so on. (3) focus on metal parts, the quality of plastic pieces of wood furniture are used metal parts, plastic parts as fastening joints, so the quality of metal pieces of furniture also determines the quality of furniture within the quality of good or bad. Metal parts require smart, smooth, good surface plating treatment, can not have </p> <p>rust, burr, etc., with the accuracy requirements of the pieces to be high. Plastic parts to be beautiful, colorful, the use of the strength of the parts must have the intensity and flexibility, not too thin. Open-type connector requires a flexible rotation, the internal spring to be appropriate, so that furniture will be used in the open, easy, no friction </p> " patio floors cheap and eco friendly , wateproof wood composite panel sale , do it yourself deck kits for beginners needle , suppliers of outdoor replacement chair slats "
|