ASP-FastBoard: Forum-ID 11465

Stone CNC Router Machine

igoldencnc — Fri, 29 May 2026 09:36:31 +0100

CNC stone engraving machine includes economical CNC stone engraving machine with single spindle, upgraded CNC stone carving machine with dual-spindle, kitchenware stone machining centre, 3D stone machining centre and stone bridge cutter.

Stone CNC machine mainly refers to stone CNC router and stone CNC machining center.

It is also known as CNC stone cutting machine, stone carving machine, marble engraving machine, and quartz CNC machine for three-dimensional relief and line carving, cutting, beveling, drilling, carving and other processing of marble, granite, bluestone, sandstone, artificial stone, tombstone, milestone, ceramic tile, floor tile and other materials.

The stone CNC machine bed is welded by the thick wall steel seamless tube, high temperature tempering treatment, high rigidity, bearing strength better .
Dual stepper motor drive for Y-axis, moving stably.
DSP control with good software compatibility, suitable for Type3, Artcam, Castmate, Ucanam.
Constant spindle motor 5.5 KW power, strong cutting strength, high efficiency.
High precision rack transmission, high speed.
Imported linear square guide way, double row four row slider, high precision, long life time.
Well selected electrical accessory, let the failure rate to the minimum.
With water and automatic water supply and cooling system.
Dustproof and waterproof design, better to protect the machine driving part.

The main materials processed by the quartz stone CNC center are quartz stone, marble, granite stone, artificial stone, slate, and other stones. The scope of application of quartz stone machining centers are kitchen cabinet countertops, stone coffee table desktops, cutting of basin holes, bar counters, bathroom countertops, background wall carving, etc. The main uses of CNC processing stone center are front roman side processing, rear water-retaining round bottom processing, basin hole cutting processing, special-shaped cutting, and polishing.

5 Axis Bridge Saw Cutting Machine

Stone Engraving CNC Router for Monuments Headstones Art Sculpture

Quartz Granite and Marble Slabs CNC Machining Center

CNC Bridge Saw for Granite & Marble Stone Cutting Machine

Granite Marble and Stone Fabrication & Kitchen Countertops Cut Equipment

CNC Machine for Glass

igoldencnc — Fri, 29 May 2026 09:28:59 +0100

When it comes to a glass CNC machine, there are several types of machines that are commonly used for cutting, engraving, and shaping glass materials.

Glass Cutting Machine: This machine is specifically designed to cut glass sheets into various shapes and sizes with precision. It uses a diamond cutting tool or a high-pressure water jet to achieve clean and accurate cuts on glass surfaces.
Glass Drilling Machine: This machine is equipped with diamond-tipped drill bits that are capable of drilling precise holes in glass materials. It is commonly used for creating openings in glass for hardware installation or decorative purposes.

Glass Engraving Machine: This machine is used to create intricate designs, patterns, and text on glass surfaces. It utilizes a high-speed spindle and specialized engraving bits to etch the glass with precision and detail.
Glass Edging Machine: This machine is used to grind and polish the edges of glass panels to achieve a smooth and finished look. It can be adjusted to create different edge profiles, such as flat, beveled, or rounded edges.
Glass Washing Machine: After the cutting, engraving, or drilling process, glass surfaces often need to be cleaned to remove any debris or residue. A glass washing machine is used to wash and dry glass panels efficiently.

Applications
Architecture: Used for producing glass panels, windows, and facades.
Automotive: Employed in cutting and shaping glass for vehicles, including windshields and side windows.
Art and Design: Ideal for creating decorative glass pieces and custom engravings.
Furniture: Used in making glass tabletops, shelves, and other furniture components.

Automatic Glass Cutting Line

CNC Glass Cutting Machine with Automatic Feeding

Mixed Laser Engraver Machine for Metal & Nonmetal

Picosecond Laser Glass Cutting Machine for Custom Glass

Glass Milling Drilling Edge Grinding Polishing Machine

Automatic CNC Glass Drilling Milling Machine

CNC Wood Router

igoldencnc — Fri, 29 May 2026 09:23:44 +0100

CNC Wood Router is a wood router machine controlled by the computer. It can process 2D/3D, milling, carving (relief, plane engraving, hollow carving, 3D carving), cutting, slotting and drilling of most popular wood materials and other soft materials, including woodworking crafts, wood carving, wooden marks, wooden toys, wooden gifts, cabinet making, wooden door making, wooden modelling, production of wooden furniture such as wardrobe.

power supply, limit switch and so on.

CNC Wood Router is also known as wood CNC machine, woodworking CNC router, wood CNC router, CNC wood carving machine, wood CNC cutter, CNC wood milling machine, wood CNC table, CNC wood table, CNC wood router machine, CNC woodcarver, CNC wood engraver, CNC woodcutter, CNC wood cutting machine, c and c wood router, CNC woodworking machine, CNC wood engraver, wood c and c machine.

How does the CNC Wood Router work?
By using CAD or CAM software, the design and typesetting are carried out on the computer, and the generated information is automatically transmitted to the controller of the CNC wood router by the computer. Then the controller converts the information into a power signal (pulse train) which can drive the stepper motor or servo motor and controls the movement path of the X, Y and Z three axes of the CNC wood router host.

The high-speed spindle on the wood router machine, connected with the bits(cutting tools) suitable for processing the specified materials, then processing the material which fixed on the worktable, the parts designed in the computer will be processed by automatic processing.

CNC Wood Router includes 3-axis CNC Wood Router, 4-axis CNC Wood Router, 5-axis CNC Wood Router, and CNC machining centre with automatic tool changer.

IGW-ATC 1325（PRO）ATC CNC Machine

1. High-quality HQD 9.0 kw air-cooling spindles, ensures efficient operation.

2. Servo motor and driver, higher precision.

3. Vacuum table with T-slot (Clamps) table, more convenient for woodworking.

4. New desigan machine with a saw for fast cut, and saw can adjustment freely on X and Y.

5. Different working size 1300 * 2500mm / 1500*3000mm dependent on your choose and more practical for woodworking.

6. The oil lubrication system ensures the stability of mechanical parts.

7. 8-12 Tool Magazine, Tool changer automatically, many times increases productivity.

8. Taiwan’s SYNTEC control system is more convenient to operate the machine for processing 2D, 3D engraving.

9. Hiwin 25 square guide rails and rack transmission

10. Breakpoint memory, can continue to work after power off & breaking knife

11. Positioning pneumatic cylinder design to fix the plate faster and more accurately, improving work efficiency

12. Machine with Oil mist cooling system for metal materials engraving and cutting

Best CNC Router Machines for Woodworking

Wood CNC Machine

5 Axis CNC Machine with Gantry Moving for Wood Foam 3D Carving

Nesting CNC machine

igoldencnc — Fri, 29 May 2026 09:19:05 +0100

Nesting CNC machine is mainly used to cut various wooden works. Generally, through the design of intelligent software, the nesting CNC routers can automatically optimize the typesetting design and generate the effect map. Besides, the nesting machine can also perform operations such as modification intuitively, and automatically generate various paths. Therefore, it can save sheets and improve sheet utilization. The nesting CNC machine is widely used in the furniture industry such as cabinet doors, wardrobe doors, solid wood doors, paint-free doors, solid wood composite doors, and suite doors. If you are a manufacturer of furniture production lines, this nesting CNC machine is definitely one of your indispensable CNC equipment.

CNC Wood Cutting Machine for Furniture Making

1325 ATC Router CNC Nesting Machine

CNC Wood Cutting and Nesting Machine for sale

CNC Machine for Kitchen Cabinets Making

CNC Cabinet Making Machine | Kitchen Cabinet Machinery

Nesting CNC machines are regarded as the best furniture manufacturing machines by cabinet makers and furniture manufacturers to set up a furniture production line or realize their custom furniture making projects, plans, and ideas. As a core CNC machine for furniture making, the CNC nesting machine is widely used to cut, drill, punch, groove, pocket, and engrave various wooden boards. With the help of automatic nesting software, the nesting CNC router can maximum the utilization of a wood panel and minimize cutting time and material waste.

The CNC Nesting Machine with Drilling is equipped with drilling bag, equipped with a 9.0kw air-cooled spindle, and independent operation. Usually used in conjunction with labelling coding machines and automatic loading and unloading platforms. High speed, high precision, high efficiency and stability.It is suitable for processing various cabinet doors and wooden doors.

Edge Banding Machine

igoldencnc — Fri, 29 May 2026 09:12:51 +0100

The edge banding machine, is used to band the straight and curved panel edges for custom furniture production. A woodworking edge banding machine falls into the manual edge banding machine and the auto edge banding machine, specially designed for shops and companies looking for efficient and precise edge banding service and solutions.

Functions of the automatic edge banding machine include pre-milling, gluing, banding, end cutting, rough and fine trimming, corner rounding, scraping, polishing, etc. The manual edge bander and semi automatic edge banding machine can also realize straight and curve cabinet edge banding.

The edge banding tape can have various materials, such as PVC, ABS, melamine, and wood veneer. It can band 0.4 to 3mm PVC edge banding tape to plywood, MDF, birch, walnut, maple, and other wooden panels in panel furniture and whole house custom furniture production.

Portable Edge Banding Machine for Small Shops

Automatic Edge Banding Machine for Panel Furniture

An edge banding machine is a specialized woodworking equipment designed to automatically apply and finish edge banding material to the exposed edges of panel-based furniture components. These machines bond thin strips of wood veneer, PVC, ABS plastic, or melamine material to the raw edges of particleboard, MDF, plywood, and other engineered wood products, creating a finished appearance while protecting the panel core from moisture and damage.

Functions of the automatic edge banding machine include pre-milling, gluing, banding, end cutting, rough and fine trimming, corner rounding, scraping, polishing, etc. The manual edge bander and semi automatic edge banding machine can also realize straight and curve cabinet edge banding. Edge banding machines represent essential equipment in modern furniture manufacturing, cabinet making, and millwork operations.

Top Rated CNC Plasma Tables & Plasma Cutters

igoldencnc — Thu, 29 May 2025 07:20:11 +0100

Plasma cutting machine is a tool used to cut through various types of metal using a high-temperature plasma jet. they offer a fast and accurate way to cut through various types of metal, including stainless steel, aluminum, and copper. In order to meet the cutting needs of different customers, IGOLDENLAESR not only provides laser cutting machines, but also provides you with flatbed plasma cutting machines, tube plasma cutting machines, portable plasma cutting machines and gantry plasma cutting machines.

It not only has the advantages of narrow cutting seam, fast cutting speed, small heat affected zone, flat cutting, small workpiece deformation and simple operation, but also has significant advantages and energy-saving effect. It is applicable to more metal cutting projects and plans such as various machinery, metal structure manufacturing, maintenance and installation services, sheet metal manufacturing, drilling, excavation and repair, chamfering and so on.

IGOLDENLASER provides various types of plasma cutting machines. The following is an overview of standard models of plasma cutting machines. Our plasma cutting machines are delivered completely complete and ready for immediate use: just plug in and go to work. Finally, we can also customize a unique plasma cutting machine for you according to your specifications and requirements.

Gantry CNC Plasma Flame Cutting Machine

Hypertherm Plasma Cutting Machine

CO2 Laser Engraving Machine

igoldencnc — Thu, 29 May 2025 07:17:41 +0100

CO2 laser cutter is the best laser machine uses CO2 laser engraving technology (CO2 laser beam) to cut and engrave wood, MDF, acrylic, plywood, PVC, plastic, paper, jeans, ABS, fabric, PVB, textile, leather, stone, glass, thin soft metals, etc, which has wide applications in the advertising industry, crafts industry, packing industry, garment industry, educational institution, small business, and so on. So it is also called non metal laser cutting machine, cheap CNC CO2 laser cutting machine near me, home use CO2 laser engraving cutting machine, and CO2 laser CNC wood cutting machine.

Mixed Laser Engraver Machine for Metal & Nonmetal

Mini Laser Engraving Machine

Laser Engraver Machine and CO2 Laser Cutting Machine

Best Co2 Laser Engraver for Small Business

Laser Welder

igoldencnc — Thu, 29 May 2025 07:13:12 +0100

Laser welding machines are categorized based on functions or applications: handheld laser welding machine, automatic laser welding machine, jewelry laser welding machine, mold laser welding machine, and robot laser welding machine. The configuration, parameters, fixtures, and accessories of all laser welding machines can be customized.

Laser welder (Laser Power:1000W, 1500W, 2000W,3000w), self-developed wobble welding joint, adjustable spot width, strong welding fault tolerance, can be equipped with automatic wire feeding system, expand the welding requirements of processing parts, reduce the technical requirements for operators.

Air-Cooling Portable Laser Welder

3 In 1 Handheld Welding Cleaning and Cutting Machine

LASER CLEANER, LASER MACHINE, LASER WELDER
3 In 1 Handheld Welding Cleaning and Cutting Machine
LASER CLEANER, LASER MACHINE, LASER WELDER
4 In 1 Laser Welding Machine

LASER CLEANER, LASER MACHINE, LASER WELDER
5-in-1 Handheld Metal Laser Welding Cutting Machine

CNC knife cutting machine

igoldencnc — Thu, 29 May 2025 07:08:56 +0100

A CNC knife cutting machine is a professional automated digital cutting system that uses the up and down high-frequency vibration of the blade to cut flexible materials.

It can high-speed, single-layer and multi-layer cut material such as fabric, cloth, textile, clothing, leather, vinyl, cardboard, carton board, corrugated board, honeycomb board, gray board, paper, plastic, EVA, EPE foam, PVC foam, polyethylene foam,Non-asbestos gasket, silicone gasket, tangled pattern gasket, rubber gasket, cork gasket, PTFE, PTFE,display stand, printed PVC board, KT board, acrylic, paper, EVA, foam, vinyl sticker, reflective material, outdoor advertising, sign, etc.

A automatic digital cutter is also known as digital cutting table, automatic flatbed cutter, cutting plotter, dieless cutter, flash cutter, CNC knife cutter, CNC drag knife, CNC tangential knife, CNC oscillating knife, automatic precision cutter, and CNC blade cutting table. In recent years, oscillating knife cutting technology has been more and more widely used in the processing industry of non-metallic materials.

4 Axis 5 Axis CNC Bridge Saw Machine

igoldencnc — Thu, 29 May 2025 07:05:33 +0100

Bridge saw machine is a type of stone cutting machine designed for diversified stone business. And CNC stone bridge cutters are cutting machines made for cutting natural stone, granite, marble, and ceramics. With a CNC stone saw, it is good at special-shaped cutting, polishing, edging, drilling, and chamfering of granite, marble, quartz, artificial stone, and natural stone. Therefore, it is also known as stone bridge saw cutting machine, stone bridge saw for quartz, bridge saw for granite, tile bridge saw, marble bridge cutting machine, stone bridge saw cutter, etc.

Whether it is 5 axis CNC bridge saw, 4 axis bridge cutting machine, or 3 axis stone cutting bridge saw, they are all multi-functional, easy to operate, labor saving, fast, precise, economical, and practical. Moreover, we support machine customization to realize your bridge saw cutting designs and projects.

4 +1 Axis Stone Bridge Saw for Marble Granite and Quartz

5 Axis CNC Bridge Saw for Quartz, Granite, Marble(2024 Upgraded)

Auto CNC Bridge Saw Stone Cutting Machine

CNC Bridge Saw for Marble, Quartz Stone,Tile Cutting

5 Axis CNC Stone Cutting Bridge Saw for Quartz Granite Marble

https://www.igolden-cnc.com/wp-content/uploads/2022/09/Stone-Bridge-Saws-Granite-Marble-Cutting-Machine-360x360.jpg

STONE CNC MACHINE
Stone CNC Router Cutting & Engraving Machine

CNC ROUTER, STONE CNC MACHINE, STONE CNC MACHINE