ASP-FastBoard - Demo/Support-Forum
Forum anmelden / register Board
SearchSearch CalendarCalendar GalleryGalleryAuction-PortalAuctions GlobalGlobal Top-ListTopMembersMembers StatisticsStats
get your RSS-Feed
Language/Sprache:  Admin  
 Login: ChatChat (0) new User-MapUser-Mapsend Passwordsend Password RegisterRegister

Forum Overview » Homepagetools - Support » Off-Topic » Molten aluminium degasser can be problematic as it must be carried out
Pages: (1) [1] »
Registration necessaryRegistration necessary
Molten aluminium degasser can be problematic as it must be carried out
baiyuncarbonno Access no Access first Post cannot be deleted -> delete the whole Topic 
Group: User
Level: treuer Poster


Posts: 214
Joined: 12/13/2021
IP-Address: saved
offline


Molten aluminium (Al) is an extremely reactive substance. The molten metal is so reactive that it will readily decompose water in the atmosphere, or moisture on wet tools, releasing hydrogen into the melt. Even small volumes of water condensing on a crucible furnace or transfer ladle can affect the quality of final castings. Excess hydrogen can affect the distribution of porosity, and the total amount of shrinkage, ultimately increasing scrappage. Eliminating gas absorption from molten aluminium is unfeasible. So, metallurgists tend to focus on preventing hydrogen introduction into the melt and removing as much as possible prior to casting.



Why aluminum degasser is Important

Aluminium and its alloys are susceptible to a unique form of chemical corrosion known as hydrogen-induced cracking, which is caused by the gradual diffusion of hydrogen (H) molecules through the metal’s crystal lattice. This creates a localised flaw within the alloy that can significantly impair both its tensile strength and ductility, reducing its fracture toughness, thus increasing the risk of surface fracture. While solid, the hydrogen solubility of aluminium is negligible. Molten aluminium, however, is an incredibly reactive substance that actively decomposes moisture to produce hydrogen (H).



Explaining Molten Aluminium Degasser

Molten aluminum degasser is an essential process in alloy casting. It is carried out through one of two methods: flux or rotary degassing. A rotary degasser comprises a motorized drive and a hollow, rotating shaft that directly injects an inert gas such as argon (Ar) or nitrogen (N2) into the aluminium melt. The combination of the shaft’s rotating motion and the purging of this inert gas causes a high volume of bubbles to form within the melt.

Hydrogen that has dissolved in the molten aluminium then diffuses into these bubbles and separates from the liquid phase. This provides a more efficient and clean method of hydrogen removal compared to flux degassing.



Adtech for Molten aluminum degasser


Molten aluminium degasser can be problematic as it must be carried out in situ when the melt is maintained at temperatures exceeding 700°C (1292°F). This can induce chemical attack and thermal degradation of the rotor shaft and purge valves. Silicon nitride (Si3N4) degassing components have been widely used, but there are alternative refractory materials that are more cost-effective while offering almost identical oxidation resistance and high-temperature performance.



7/11/2022 7:49:39 AM   
lejeyej186no Access no Access no Access 
Group: User
Level: Frischling


Posts: 5
Joined: 6/28/2023
IP-Address: saved
offline


It's natural to feel motivated and eager to push your limits when starting a gym routine. However, overdoing it can do more harm than good. Going from zero to intense workouts can lead to muscle strains, fatigue, and burnout. It's important to start slowly and gradually increase the intensity and duration of your workouts over time. check my source


6/28/2023 9:45:24 AM   
Magaret Kingno Access no Access no Access 
Group: User
Level: braver Poster


Posts: 47
Joined: 8/3/2019
IP-Address: saved
offline


Molten aluminium degasser is an essential process in the production of high-quality aluminum alloys. It plays a crucial role in eliminating impurities and enhancing the overall metal properties. However, like any industrial operation, challenges may arise. One potential issue is the complexity involved in maintaining the ideal degassing conditions. You can click over here, it's important to carefully monitor the temperature, gas flow rates, and the efficiency of the degassing agent. With proper attention and expertise, these challenges can be overcome, ensuring a successful degassing process. Ultimately, the benefits of molten aluminium degasser, such as improved mechanical properties and reduced porosity, make it a vital step in achieving top-notch aluminum products.


7/10/2023 9:20:42 AM   
Registration necessaryRegistration necessary
Pages: (1) [1] »
all Times are GMT +1:00
Thread-Info
AccessModerators
Reading: all
Writing: User
Group: general
Cyberlord, sense100
Forum Overview » Homepagetools - Support » Off-Topic » Molten aluminium degasser can be problematic as it must be carried out

.: Script-Time: 0.125 || SQL-Queries: 6 || Active-Users: 5,624 :.
Powered by ASP-FastBoard HE v0.8, hosted by cyberlord.at